DIGITAL DASH DISPLAY SIM RACING DIY

DIGITAL DASH DISPLAY SIM RACING DIY

https://www.youtube.com/watch?reload=9&v=wtXcwcOjaF0

Make this easy dash display using a nextion 4.3″ display and free SimHub software. Great addition to your racing sim rig.

It is USB, stand alone and can be used in combination with any steering wheel – Logitech, G25, G27, G29, G920, Thrustmaster, Fanatec, or OSW.

The display works the same as the Gear Indicator we made in the last video. It just uses different templates and mapping files.

The templates are able to be customized, you will notice the 599xx and a GT3 dash also in this video. Just need Thrustmaster to send me a 599xx wheel and base to match!

Parts List
-Nextion Display 4.3″
-USB to TTL Module https://goo.gl/jTfwoY
-Wires included with display.
-Carbon or similar face plate – DIY https://goo.gl/7vUNWv
-M3 bolts+nuts.
-Soldering Iron https://goo.gl/T3CRNq
-Solder https://goo.gl/gZZjvP

WIRING
——————————————————–
DISPLAY——–WIRE———-MODULE
——————————————————–
GND———–BLACK————GND
RXD———- YELLOW ———–TX
TXD————-BLUE—————RX
+5V—————RED—————VCC

This build is working and tested in Assetto Corsa and Dirt Rally.

Enjoyed the content consider supporting here https://www.patreon.com/AMSTUDIO

Thank you for watching and being a part of the channel.
Your comments and questions are all welcome.

Please ask any question about the design, build or parts used.
Also share with others who might like to build this project.

Check here for other SIM HACKS, MODS and DIY
https://www.youtube.com/channel/UCQS1…

|SimHub | Credit to Author: Wotever|
http://www.racedepartment.com/downloa…
|Credit to Butonz for the extra templates|

関連記事一覧

PAGE TOP